Hobart Handler® 140 MIG Welder, 500559

Hobart Handler® 140 MIG Welder, 500559

A quick, easy-to-setup, reliable, durable flux-core & MIG ready welder with superior arc at best value. Welds up to 1/4″, operates on 115V input voltage and up to 140A output power.​

WHAT’S INCLUDED:
•Comfortable 10 ft. (3 m) H100S2-10 gun
•10 ft. (3 m) work cable with clamp
•Built-in gas solenoid valve and dual-gauge regulator with gas hose
•Spool hub assembly accommodates 4 or 8 in. spools
•Sample spool of .030 in. (0.8mm) self-shielding flux-cored wire
•.030 in. (0.8mm) contact tips
•Quick Select™ drive roll for .024 in. (0.6mm) or .030/.035 in. (08/.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire
•Power cord with plug
•Welding guide and material thickness gauge
•Owner’s manual with installation, operation and maintenance guidelines.

Excellent arc performance:
Smooth, stable arc on all thicknesses

Industrial cast aluminum wire drive system:
Professional and durable wire feed performance.

Five-position voltage control:
Five voltage ranges allow you to fine-tune the arc.

Quick Select drive roll:
Makes setup quicker by offering three grooves – two for different size solid wire and a third for flux-cored wire.

Weighs only 57 pounds:
Easier to transport: increased ability to weld where you need to weld.

Convenient polarity changeover:
Access makes it quick and easy to change polarity between solid or tubular wire.

Sloped control panel:
Increased visibility to the user interface makes adjustments easier.

Self- resetting thermal overload protection:
Protects power transformer from thermal overload to ensure reliability.

Self-resetting motor protection:
Protects wire feed system from overload, no fuses to change or circuit breaker buttons to reset.

NOT INCLUDED:
•Shielding gas and safety equipment not included.